GTE PRODUCT - GLAND PACKING

Has a good electrical insulation, Resistant to high Resistant to corrosion, Extremely strong, Non-flammable, High strength, Good Thermal insulation, Excellent hydrolytic resistance.

Square braided from E-glass fiber impregnated with PTFE, that largely prevents solids from entering the seal and maintains its elasticity.

Glass fiber PTFE packing is braided by texturized fiberglass yarns impregnated with PTFE dispersion.

with PTFE Impregnation
Low maintenance, easy to control, Excellent capabilities of high strength and high temperature resistance, Economical packing.

Ceramic fiber is standout among the different organic and inorganic fibers as ideal replacement of asbestos.

Asbestos yarn are braided into a square packing. General-purpose gland packing for high speed rotating and reciprocating spindles and static.

Asbestos Graphite non-metallic packing is formed by interbraided method to from very dense and yet flexible packing. Each thread is impregnated into a solution with high lubrication value, the life of this packing is much then ordinary packing.

Braided from high grade asbestos yarn suitably lubricated and reinforced with stainless steel wire. This is an ideal choice for high temperature valve application.

Long fiber white asbestos impregnated with PTFE. It has anticorrosive and long service properties.

Treated with PTFE & a special lubricant, without etching. Especially suitable for a wide range of applications for large rotary pumps in the medium pressure range.

Braided Graphite packing made from exfoliated Graphite yarn to serve extreme temperature of 600°C. Excellent thermal conductivity and operates on less gland load.

Braided Graphite packing made from exfoliated Graphite yarn having corrosion inhibitor property and a proprietary lubricant, reinforced with stainless steel/Inconel wire to serve extreme high temperature

Made from ramie fiber impregnated with PTFE dispersion and special lubricant. Can be used in rotary, reciprocating pumps, valves, pulp and paper,marine and food industry.

Ramie packing with grease is braided from cotton yarns preimpregnated with grease. The packing is then thoroughly reimpregnated after braiding process. It is flexible and resilient, easy to handle.

Designed for valves and lower shaft speed application under medial pressure in food processing, pharmaceuticals, paper mills, fiber plants where high purity and corrosion resistance is required.

It is designed for dynamic condition. The oil can reduce the frictional factor.
Recommended for all severe chemical & corrosive environment. It is compatible with all fluids except for molten alkali metals, can be used for braided valve & pump packing.

PTFE Packing with aramid fiber corners is a multi-yarn packing, the corners of packing are made of aramid fiber yarns. Impregnated with PTFE, the friction faces are made of pure PTFE yarns. It can be lubricated with silicones oil.

Good chemical resistant and heat resistant. Excellent self-lubricating, thermal conductive and low frictional co-efficient packing with no damage to shaft.
Suitable for corrosive fluids, organic solvents, steam, hot water, oil, rotary machine, valves, rotary pump, agitator, flange, etc.

Graphite PTFE Packing with aramid fiber corners is a multi-yarn packing, the corners of packing are made of aramid fiber yarns. Impregnated with PTFE, the friction faces are made of graphite PTFE yarns. It can be lubricated with silicones oil.

Multi-yarn packing, This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE. It has excellent sliding velocity and thermal conductivit. And self-lubricous packing.

Carbonized fiber yarn is square braided, impregnated with P.T.F.E. dispersion and lubricated. Very light and self-lubricous packing. Excellent thermal conductivity, It can be used to seal corrosive fluids except strong oxidizer acids, organic solvents, fluids where contamination is not permissible for centrifugal pumps, plunger pumps, mixers vales, etc.

Carbonized fiber yarn is square braided, impregnated with P.T.F.E. dispersion and lubricated. Very light and self-lubricous packing. Excellent thermal conductivity, It can be used to seal corrosive fluids except strong oxidizer acids, organic solvents, fluids where contamination is not permissible for centrifugal pumps, etc.

It shows excellent heat resistance, chemical resistance and thermal conductivity. High friction thermal conductivity, superior heat radiation and long life by self-lubricating. Suitable for corrosive fluids, organic solvents, steam, hot water, hydrocarbon, hot oil, valve, agitator, flange, etc.

Carbon fiber yarn are square braided and then impregnated with PTFE dispersion high thermal conductivity and heat dissipation and long life of shaft sleeve because of self-lubricity.
Suitable for many equipments, like pulp mill equipment, steaming vessels, top separators, refiners, etc.

Made of carbonized fiber impregnated with PTFE dispersion. It is inert to almost all corrosive chemicals. When used for pumps, frictional heat is freely conducted to the stuffing box metal because of its excellent thermal conductivity, and thus no damage will be caused to the packing.

Aramid fiber packing braided from high quality aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.

Braided from high-performance KynolTM fiber impregnated with special PTFE lubricant, it has very good mechanical properties combining softness and strength. Many advantages are obtained, likes Thermal stability, low heat expansion, High dimensional stability and superior pressure resistance